Many of you should have ceiling fans in your homes, right? We have observed that ceiling fans have a special speed control, which can be used to control the speed of the ceiling fan operation. So the following we explain the wiring method and working principle of the ceiling fan regulator.
Ceiling Fan Wire Connection
First of all, you need to prepare a circuit breaker, a fan regulator, a ceiling fan. In fact, the wiring is very simple, for fan speed controller only two terminals, live wire into and live wire out of the two terminals.
The wiring of the neutral wire “N” is not through the fan regulator, directly to the ceiling fan up. First, we will be the circuit breaker of the live wire “L” to the fan regulator into the fire line end, the fire line out of the terminal to the ceiling fan motor, ceiling fan motor and then connected back to the circuit breaker neutral wire “N” can. I believe that we will not have a problem with the wiring, remember that the fan regulator must be controlled to come in the fire line.
Let's Learn More About Working Principle of Ceiling Fan Connection with Regulator
Ceiling fan is to reduce the current by regulating the voltage, thereby controlling the speed of run. Fan speed control gear to change the power supply circuit voltage and current size to change the motor rate, thereby changing the speed of the ceiling fan.
Warm Tips
Fan speed controller, wall switches, etc. are only control the live line, do not access the neutral line, otherwise in the case of closure, it is equivalent to the live line and neutral line lap each other easy to cause a short-circuit fault, but also a great safety hazard may occur in serious cases of fire.