Introduction
Wall fan, refers to a small electric fan mounted to the wall to serve the purpose of saving space. Features are convenient, practical and beautiful. Wall fan is divided into two kinds of directional wall fan and steering wall fan, steering wall fan a variety of ways to adjust the swing head, can swing the head blowing, but also lock the angle, blowing a wide range of wind, the use of large wind fan blade, the application of perfect aerodynamics, low resistance, strong wind, smooth operation. Wall mouted fan is mostly used in cafeterias, restaurants, factories and other places.
wall mounted fan because of the specificity of the installation site, so the wall fan does not occupy space at all, only need to punch a hole in the wall to install the wall fan, and the wall fan wind speed and rotation function is well designed, a wall fan can be multiple areas to feel the cool breeze.
Advantages of Wall Fan
1. Large air volume: the use of large wind fan blades, the application of perfect aerodynamics, low resistance, strong wind power, smooth operation.
2. Blowing a wide range: a variety of ways to adjust the shaking head, can also lock the angle, blowing a wide range of wind.
3. Safety: well-selected materials, strict quality control, the use of rigorous manufacturing process, the practice of fan fine, safe and reliable.
Name of Wall Fan Parts
1. Front Grille
2. Fan Blade Nut
3. Fan Blade
4. Grille Nut
5. Rear Grille
6. Motor Shaft
7. Motor
Fan Grille Assembly Methods
1. Unscrew the fan blade nut and the grille nut from the front end of the motor shaft.
2. Install the rear grille, put the rear cover back into the grille nut and tighten it.
3. Before installing the fan blade, take out the plastic sleeve protecting the motor shaft.
4. Make the groove behind the fan blade clamp on the limit pin of the motor shaft to fix the fan blade.
5. Tighten the fan nut counterclockwise.
6. When installing the front grille, the logo of the front grille should be straightened, and then insert the circular edge ring of the front grille into the shallow groove of the mesh hoop that has been fixed on the rear grille, close the mesh buckle, and fasten the mesh hoop.
How to Hang a Fan on The Wall?
We have already shown you how to hang a fan on the wall in a previous article, which can be read in detail for links: https://unitedstarcrown.com/how-to-hang-a-fan-on-the-wall/
Care and Cleaning
1. Do not insert the plug into the socket until the fan is clean or fully assembled.
2. When cleaning the housing, wipe it clean and dry with a cleaning cloth soaked in detergent. Do not use any abrasive tools or solvents that may damage the surface.
3. Do not allow water or other liquids to enter the motor.
Safety Operating Rules
1. The fan should be used at the rated voltage.
2. Do not insert the power plug into the power socket until after the fan has been assembled.
3. When using the fan, do not put your fingers or other objects into the grille.
4. Turn out the power plug when not in use and when moving the fan position or before disassembling the fan.
5. Disconnect the power plug before cleaning the fan.
6. Make sure the fan is placed on a smooth surface to prevent it from falling over when running.
7. Do not place the fan in a window to prevent the risk of leakage from rain.
Warning
1. Children should be used under adult supervision to avoid accidents.
2. Please ensure that the power supply is disconnected before disassembling or moving the product.
3. Check the power cord and plug for damage before use. If the power cord is damaged, it must be replaced by a maintenance professional to avoid danger.
Wall fan from the selection of fan blades to the appearance of the selection of materials, UnitedStar Crown brand have high quality gatekeepers, I believe that the quality of each UnitedStar Crown wall mounted fan are over. UnitedStar Crown wall fan belongs to the absolute good value for money type wall mounted fan, well-selected materials, strict quality control, the use of rigorous manufacturing process, the practice of fan fine, safe and reliable.